2007 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Fusion — Year-Specific Fitment Context
The 2007 Ford Fusion is in year 2 of 7 using the 5x114.3 pattern (2006–2012). Wheels from any 2006–2012 Ford Fusion are cross-compatible with the 2007 model. Across its full production run (2006–2020), the Fusion has also used: 5x108.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| ▸ 2007 | 5x114.3 | 67.1 | 44 |
| 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| 2012 | 5x114.3 | 67.1 | 44 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
Fitment Notes
The 2007 Ford Fusion has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years).
Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2007 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2007 Ford Fusion?
The 2007 Ford Fusion uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Ford Fusion have the same bolt pattern as the 2007?
The Ford Fusion uses the 5x114.3 pattern from 2006 through 2012. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2007 Ford Fusion?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2007 Ford?
The 2007 Fusion uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2007 Ford Fusion?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2007 Ford Fusion?
The OEM offset for the 2007 Fusion is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Ford Fusion has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2006-2020 (15 model years).
- Observed bolt-pattern variants: 2 (5x108, 5x114.3).
- Observed total offset span across years: 6.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Ford Fusion, please report it via our About page contact so we can verify and update this record.