2012 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Fusion — Year-Specific Fitment Context
The 2012 model year is the final year of the Ford Fusion's 5x114.3 bolt pattern run (since 2006). Wheels from any 2006–2012 Ford Fusion are cross-compatible with the 2012 model. Important: starting in 2013, Ford switched to 5x108 — those wheels will not fit the 2012 model. Across its full production run (2006–2020), the Fusion has also used: 5x108.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| 2007 | 5x114.3 | 67.1 | 44 |
| 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| ▸ 2012 | 5x114.3 | 67.1 | 44 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Ford Fusion
The 2012 Ford Fusion uses a 5x114.3 bolt pattern with a 67.1mm center bore and 44mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The offset is sensitive; staying within ±5mm of 44mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles. Note: 2013+ Fusion models use 5x108; those wheels will not fit your 2012.
Historical Fitment Data Reference
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if the aftermarket wheel center bore is larger than 67.1mm to ensure proper centering and prevent vibrations.
- ✅ Stick to offsets between 38mm and 50mm to avoid rubbing on the strut or fender; test fit before finalizing.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving, as wheels can settle and loosen.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2012 Ford Fusion?
The 2012 Ford Fusion uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Ford Fusion have the same bolt pattern as the 2012?
The Ford Fusion uses the 5x114.3 pattern from 2006 through 2012. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Will 2013 Ford Fusion wheels fit a 2012 model?
No. The 2013 Ford Fusion switched to a 5x108 bolt pattern, which is not compatible with the 2012 model's 5x114.3. Using mismatched patterns is unsafe.
What is the factory wheel offset for a 2012 Ford Fusion?
The OEM offset for the 2012 Fusion is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2012 Ford Fusion use?
The 2012 Ford Fusion uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Ford fit my 2012 Fusion?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset