2014 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 Fusion — Year-Specific Fitment Context
The 2014 Ford Fusion is in year 2 of 8 using the 5x108 pattern (2013–2020). Wheels from any 2013–2020 Ford Fusion are cross-compatible with the 2014 model. Across its full production run (2006–2020), the Fusion has also used: 5x114.3.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| 2007 | 5x114.3 | 67.1 | 44 |
| 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| 2012 | 5x114.3 | 67.1 | 44 |
| 2013 | 5x108 | 63.4 | 50 |
| ▸ 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2014 Ford Fusion
For the 2014 Ford Fusion, the bolt pattern is 5x108 with a center bore of 63.4mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is critical: stock is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree). Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles. Note that 2013-2020 Fusion wheels are direct fit, but earlier models (2006-2012) use 5x114.3 and are incompatible.
Historical Fitment Data Reference
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 63.4mm to avoid vibrations.
- ✅ Stick to offset between 45-55mm to prevent rubbing on suspension or fenders; verify clearance with a test fit.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2014 Ford Fusion?
The 2014 Ford Fusion uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Fusion have the same bolt pattern as the 2014?
The Ford Fusion uses the 5x108 pattern from 2013 through 2020. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Will wheels from another Ford fit my 2014 Fusion?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Can I use spacers on my 2014 Ford Fusion?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the PCD for a 2014 Ford Fusion?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Fusion, the PCD is 5x108.
How do I measure the bolt pattern on my 2014 Ford?
The 2014 Fusion uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset