2015 Ford Focus ST Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Ford Focus ST, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2015 Focus ST — Year-Specific Fitment Context
The 2015 model year is the final year of the Ford Focus ST's 5x108 bolt pattern run (since 2013). Wheels from any 2013–2015 Ford Focus ST are cross-compatible with the 2015 model.
Ford Focus ST Bolt Pattern by Year
The table below shows how the Focus ST's wheel specifications have changed over the years. The 2015 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2015 Ford Focus ST
For your 2015 Ford Focus ST, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct 12x1.5 lug nuts with a conical (60-degree) seat—never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles. Avoid wheels from earlier Focus models (pre-2013) as they use a different bolt pattern.
Historical Fitment Data Reference
In our dataset, Ford Focus ST appears from 2013 to 2015 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 63.4mm center bore.
- ✅ Double-check offset: +50mm is ideal; +45mm to +55mm is safe, but lower offsets may require fender rolling.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Ford Focus ST — Frequently Asked Questions
What is the bolt pattern for a 2015 Ford Focus ST?
The 2015 Ford Focus ST uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Focus ST have the same bolt pattern as the 2015?
The Ford Focus ST uses the 5x108 pattern from 2013 through 2015. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
What does 50mm offset mean for the 2015 Focus ST?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What lug nut size does the 2015 Ford Focus ST use?
The 2015 Ford Focus ST uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2015 Ford Focus STs use lug bolts or lug nuts?
The 2015 Focus ST requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2015 Ford Focus ST?
The factory center bore (hub bore) for the 2015 Ford Focus ST is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset