2013 Ford Focus ST Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Ford Focus ST, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Focus ST — Year-Specific Fitment Context
The 2013 model year marks the beginning of the Ford Focus ST's 5x108 bolt pattern era, which continued through 2015 (3 consecutive years). Wheels from any 2013–2015 Ford Focus ST are cross-compatible with the 2013 model.
Ford Focus ST Bolt Pattern by Year
The table below shows how the Focus ST's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 Ford Focus ST has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Focus ST appears from 2013 to 2015 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2013 Ford Focus ST — Frequently Asked Questions
What is the bolt pattern for a 2013 Ford Focus ST?
The 2013 Ford Focus ST uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Focus ST have the same bolt pattern as the 2013?
The Ford Focus ST uses the 5x108 pattern from 2013 through 2015. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2013 Ford Focus ST?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2013 Ford Focus ST use?
The 2013 Ford Focus ST uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 50mm offset mean for the 2013 Focus ST?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What is the factory wheel offset for a 2013 Ford Focus ST?
The OEM offset for the 2013 Focus ST is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Focus ST is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2015 (3 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 Ford Focus ST, please report it via our About page contact so we can verify and update this record.