2025 Ford Mustang MACH-E Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Ford Mustang MACH-E is 5x108. It has a center bore of 63.4 mm, an offset range of 47.5, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 150 ft-lbs (204 Nm).

2025 Ford Mustang MACH-E Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x108
Center Bore (Hub Bore) 63.4 mm
Offset Range (ET) 47.5
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 150 ft-lbs (204 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 Mustang MACH-E — Year-Specific Fitment Context

The 2025 model year marks the beginning of the Ford Mustang MACH-E's 5x108 bolt pattern era, which continued through 2026 (2 consecutive years). Wheels from any 2025–2026 Ford Mustang MACH-E are cross-compatible with the 2025 model. Note: the 2024 model used a different pattern (5x114.3), so its wheels are NOT interchangeable with the 2025. Across its full production run (2021–2026), the Mustang MACH-E has also used: 5x114.3.

Ford Mustang MACH-E Bolt Pattern by Year

Looking for all generations? View the complete Ford Mustang MACH-E (2021–2026) Bolt Pattern & Generation Guide →

The table below shows how the Mustang MACH-E's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2021 5x114.3 70.5 35-45
2022 5x114.3 70.5 35-45
2023 5x114.3 70.5 35-45
2024 5x114.3 70.5 35-45
▸ 2025 5x108 63.4 47.5
2026 5x108 63.4 47.5

2025 Ford Mustang MACH-E Wheel Interchange & Donor Fitment Guide (5x108)

The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2025 Ford Mustang MACH-E, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:

DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2025 Polestar 2 63.4 mm (Exact) 45-50 14x1.5 (Ball)
2025 Polestar 3 63.4 mm (Exact) 40-50 14x1.5 (Ball)
2025 Polestar 4 63.4 mm (Exact) 40-50 14x1.5 (Ball)
2024 Polestar 5 63.4 mm (Exact) 35-45mm M14x1.5 (Cone)
2025 Volvo ACL 63.4 mm (Exact) 45-55 14x1.5 (Ball)
2025 Volvo B5R 63.4 mm (Exact) 35-45 14x1.5 (Ball)

HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1996 Volvo 850 65.1 mm 65.1mm → 63.4mm 43
2016 Volvo S80 65.1 mm 65.1mm → 63.4mm 52,5
1992 Lincoln Continental 70.5 mm 70.5mm → 63.4mm 40
2005 Maserati GranSport 67.1 mm 67.1mm → 63.4mm 53
1992 Volvo 240 65.1 mm 65.1mm → 63.4mm 25
1998 Volvo C70 65.1 mm 65.1mm → 63.4mm 43
Looking for all models? View the complete directory of vehicles with 5x108 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 Ford Mustang MACH-E — Frequently Asked Questions

What is the bolt pattern for a 2025 Ford Mustang MACH-E?

The 2025 Ford Mustang MACH-E uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 47.5mm.

What other years of Ford Mustang MACH-E have the same bolt pattern as the 2025?

The Ford Mustang MACH-E uses the 5x108 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

Can I use 2024 Ford Mustang MACH-E wheels on a 2025?

No. The 2024 Mustang MACH-E used a 5x114.3 bolt pattern, which differs from the 2025's 5x108. They are not interchangeable.

Will wheels from another Ford fit my 2025 Mustang MACH-E?

Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.

Can I use spacers on my 2025 Ford Mustang MACH-E?

Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

What is the factory wheel offset for a 2025 Ford Mustang MACH-E?

The OEM offset for the 2025 Mustang MACH-E is typically around 47.5mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Ford Mustang MACH-E By Year

2021 2022 2023 2024 2025 2026

Other Ford Models

E350 Super Duty Cargo Econoline E350 Cargo Expedition Expedition EL F-600 F150 Regular Cab F250 Crew Cab F250 Super Cab F350 Super Duty Crew Cab Fusion Fusion Energi Fusion Plug-in Hybrid Tempo Thunderbird Transit 150 Cargo Van Transit 150 Wagon Transit 350 Van Transit 350 Wagon Transit Connect Passenger ZX2

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)