2021 Ford Mustang MACH-E Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Ford Mustang MACH-E, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Mustang MACH-E — Year-Specific Fitment Context
The 2021 model year marks the beginning of the Ford Mustang MACH-E's 5x114.3 bolt pattern era, which continued through 2024 (4 consecutive years). Wheels from any 2021–2024 Ford Mustang MACH-E are cross-compatible with the 2021 model.
Ford Mustang MACH-E Bolt Pattern by Year
The table below shows how the Mustang MACH-E's wheel specifications have changed over the years. The 2021 model year is highlighted.
Fitment Notes
The 2021 Ford Mustang MACH-E has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Mustang MACH-E appears from 2021 to 2024 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2021 Ford Mustang MACH-E — Frequently Asked Questions
What is the bolt pattern for a 2021 Ford Mustang MACH-E?
The 2021 Ford Mustang MACH-E uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 35-45mm.
What other years of Ford Mustang MACH-E have the same bolt pattern as the 2021?
The Ford Mustang MACH-E uses the 5x114.3 pattern from 2021 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2021 Ford Mustang MACH-E?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 70.5mm (using hub rings if larger).
What is the factory wheel offset for a 2021 Ford Mustang MACH-E?
The OEM offset for the 2021 Mustang MACH-E is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2021 Ford Mustang MACH-Es use lug bolts or lug nuts?
The 2021 Mustang MACH-E requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2021 Ford Mustang MACH-E?
The factory center bore (hub bore) for the 2021 Ford Mustang MACH-E is 70.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Mustang MACH-E is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2021-2024 (4 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2021 Ford Mustang MACH-E, please report it via our About page contact so we can verify and update this record.