2026 Ford Mustang MACH-E Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ford Mustang MACH-E is 5x108. It has a center bore of 63.4 mm, an offset range of 47.5, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 150 ft-lbs (204 Nm).
2026 Ford Mustang MACH-E Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 47.5 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 150 ft-lbs (204 Nm) |
2026 Mustang MACH-E — Year-Specific Fitment Context
The 2026 model year is the final year of the Ford Mustang MACH-E's 5x108 bolt pattern run (since 2025). Wheels from any 2025–2026 Ford Mustang MACH-E are cross-compatible with the 2026 model. Across its full production run (2021–2026), the Mustang MACH-E has also used: 5x114.3.
Ford Mustang MACH-E Bolt Pattern by Year
Looking for all generations? View the complete Ford Mustang MACH-E (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the Mustang MACH-E's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ford Mustang MACH-E Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Ford Mustang MACH-E, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Volvo S60 | 63.4 mm (Exact) | 35-50 | 14x1.5 (Ball) |
| 2017 Volvo S90 | 63.4 mm (Exact) | 47,5 | B 14x1.50 (Cone) |
| 2025 Volvo V60 | 63.4 mm (Exact) | 45-55 | 14x1.5 (Ball) |
| 2025 Volvo V60CC | 63.4 mm (Exact) | 45-50 | 14x1.5 (Ball) |
| 2009 Volvo V70 | 63.4 mm (Exact) | 50 | B 14x1.50 (Cone) |
| 2017 Volvo V90 | 63.4 mm (Exact) | 47,5 | B 14x1.50 (Cone) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 1992 Lincoln Continental | 70.5 mm | 70.5mm → 63.4mm |
40 |
| 2005 Maserati GranSport | 67.1 mm | 67.1mm → 63.4mm |
53 |
| 1992 Volvo 240 | 65.1 mm | 65.1mm → 63.4mm |
25 |
| 1998 Volvo C70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ford Mustang MACH-E — Frequently Asked Questions
What is the bolt pattern for a 2026 Ford Mustang MACH-E?
The 2026 Ford Mustang MACH-E uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 47.5mm.
What other years of Ford Mustang MACH-E have the same bolt pattern as the 2026?
The Ford Mustang MACH-E uses the 5x108 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I use spacers on my 2026 Ford Mustang MACH-E?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 2026 Ford Mustang MACH-E?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Mustang MACH-E, the PCD is 5x108.
What does 47.5mm offset mean for the 2026 Mustang MACH-E?
An offset of 47.5mm means the wheel's mounting surface is 47.5mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Will wheels from another Ford fit my 2026 Mustang MACH-E?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →