2016 Ford Transit 150 Wagon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Ford Transit 150 Wagon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x160 |
|---|---|
| Lug Nut / Bolt Size | N 14x2.00 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2016 Transit 150 Wagon — Year-Specific Fitment Context
The 2016 Ford Transit 150 Wagon is in year 2 of 5 using the 5x160 pattern (2015–2019). Wheels from any 2015–2019 Ford Transit 150 Wagon are cross-compatible with the 2016 model.
Ford Transit 150 Wagon Bolt Pattern by Year
The table below shows how the Transit 150 Wagon's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x160 Pattern Context
This bolt pattern appears on 80 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x160:
Expert Buying Guide for 2016 Ford Transit 150 Wagon
For the 2016 Ford Transit 150 Wagon, the 5x160 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; stock is 60mm, and deviations beyond ±10mm may cause rubbing or suspension clearance issues. Always verify lug nut thread pitch (14x2.00) and seat type—use conical (60-degree) or ball seat lugs as specified. Avoid flat-seat lugs. Re-torque after 50-100 miles. Wheels from 2015-2019 Transit 150 Wagon are direct fit.
Historical Fitment Data Reference
In our dataset, Ford Transit 150 Wagon appears from 2015 to 2019 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger bore than 65.1mm to prevent vibrations.
- ✅ Stick to offset between 50-70mm; lower offsets may rub fenders, higher offsets may contact suspension components.
- ✅ Re-torque lug nuts to 140-150 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Ford Transit 150 Wagon — Frequently Asked Questions
What is the bolt pattern for a 2016 Ford Transit 150 Wagon?
The 2016 Ford Transit 150 Wagon uses a 5x160 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 60mm.
What other years of Ford Transit 150 Wagon have the same bolt pattern as the 2016?
The Ford Transit 150 Wagon uses the 5x160 pattern from 2015 through 2019. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2016 Ford Transit 150 Wagon?
Refer to your owner's manual for exact specs, but always tighten the N 14x2.00 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2016 Ford Transit 150 Wagon?
The OEM offset for the 2016 Transit 150 Wagon is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 60mm offset mean for the 2016 Transit 150 Wagon?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How do I measure the bolt pattern on my 2016 Ford?
The 2016 Transit 150 Wagon uses a 5x160 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset