2018 Freightliner Sprinter 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Freightliner Sprinter 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Sprinter 2500 Cargo — Year-Specific Fitment Context
The 2018 Freightliner Sprinter 2500 Cargo is in year 6 of 9 using the 6x130 pattern (2013–2021). Wheels from any 2013–2021 Freightliner Sprinter 2500 Cargo are cross-compatible with the 2018 model.
Freightliner Sprinter 2500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 2500 Cargo's wheel specifications have changed over the years. The 2018 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2018 Freightliner Sprinter 2500 Cargo
For your 2018 Freightliner Sprinter 2500 Cargo, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm can cause rubbing or clearance issues. Always verify lug nut seat type: the Sprinter uses a ball seat (radius) with 14x1.5 thread pitch. Using incorrect seat type (e.g., conical) can lead to wheel loosening. Re-torque after 50 miles. Wheels from 2013–2021 Sprinters are direct fit.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 2500 Cargo appears from 2013 to 2021 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 177 Nm (130 ft-lbs) after 50 miles of driving.
- ✅ Avoid using steel wheels from older Sprinters (pre-2013) as they have a different bolt pattern.
- ✅ When installing aftermarket wheels, ensure the hub bore is at least 84.1mm; use hub-centric rings if larger.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Freightliner Sprinter 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2018 Freightliner Sprinter 2500 Cargo?
The 2018 Freightliner Sprinter 2500 Cargo uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Freightliner Sprinter 2500 Cargo have the same bolt pattern as the 2018?
The Freightliner Sprinter 2500 Cargo uses the 6x130 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the center bore of a 2018 Freightliner Sprinter 2500 Cargo?
The factory center bore (hub bore) for the 2018 Freightliner Sprinter 2500 Cargo is 84.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Freightliner fit my 2018 Sprinter 2500 Cargo?
Only if they share the exact same 6x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 84.1mm.
Do 2018 Freightliner Sprinter 2500 Cargos use lug bolts or lug nuts?
The 2018 Sprinter 2500 Cargo requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2018 Freightliner Sprinter 2500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Sprinter 2500 Cargo, the PCD is 6x130.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset