2020 Freightliner Sprinter 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Freightliner Sprinter 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 2500 Cargo — Year-Specific Fitment Context
The 2020 Freightliner Sprinter 2500 Cargo is in year 8 of 9 using the 6x130 pattern (2013–2021). Wheels from any 2013–2021 Freightliner Sprinter 2500 Cargo are cross-compatible with the 2020 model.
Freightliner Sprinter 2500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 2500 Cargo's wheel specifications have changed over the years. The 2020 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2020 Freightliner Sprinter 2500 Cargo
For your 2020 Freightliner Sprinter 2500 Cargo, the critical fitment specs are: bolt pattern 6x130, center bore 84.1mm, offset 50mm, and lug nut size 14x1.5. The 84.1mm center bore is hub-centric; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: a 50mm offset maintains proper scrub radius and clearance; deviations may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/ball seat as per wheel manufacturer). Mismatched seats can cause loosening or wheel damage. Wheels from 2013–2021 Sprinter 2500 Cargo are cross-compatible.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 2500 Cargo appears from 2013 to 2021 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify that the wheel's center bore is at least 84.1mm; use hub-centric rings if larger.
- ✅ Avoid using impact wrenches for final tightening; use a torque wrench set to manufacturer specifications (typically 140-160 ft-lbs).
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Freightliner Sprinter 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2020 Freightliner Sprinter 2500 Cargo?
The 2020 Freightliner Sprinter 2500 Cargo uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Freightliner Sprinter 2500 Cargo have the same bolt pattern as the 2020?
The Freightliner Sprinter 2500 Cargo uses the 6x130 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What lug nut size does the 2020 Freightliner Sprinter 2500 Cargo use?
The 2020 Freightliner Sprinter 2500 Cargo uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 50mm offset mean for the 2020 Sprinter 2500 Cargo?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
How do I measure the bolt pattern on my 2020 Freightliner?
The 2020 Sprinter 2500 Cargo uses a 6x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 84.1mm center bore important for the 2020 Sprinter 2500 Cargo?
The 84.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset