2015 Freightliner Sprinter 2500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Freightliner Sprinter 2500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2015 Sprinter 2500 Passenger — Year-Specific Fitment Context
The 2015 Freightliner Sprinter 2500 Passenger is in year 3 of 9 using the 6x130 pattern (2013–2021). Wheels from any 2013–2021 Freightliner Sprinter 2500 Passenger are cross-compatible with the 2015 model.
Freightliner Sprinter 2500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 2500 Passenger's wheel specifications have changed over the years. The 2015 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2015 Freightliner Sprinter 2500 Passenger
The 2015 Freightliner Sprinter 2500 Passenger uses a 6x130 bolt pattern with a critical center bore of 84.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive; the factory 50mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct 14x1.5 thread pitch and proper seat type (flat/tapered seat for steel wheels, ball seat for factory alloys). Never use incorrect lug nuts; they can loosen or damage the wheel. Verify wheel load rating meets or exceeds the vehicle's GVWR.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 2500 Passenger appears from 2013 to 2021 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from non-Sprinter vehicles; even with same bolt pattern, center bore and offset differ.
- ✅ Check for brake caliper clearance when installing aftermarket wheels, especially with larger offsets.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Freightliner Sprinter 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2015 Freightliner Sprinter 2500 Passenger?
The 2015 Freightliner Sprinter 2500 Passenger uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Freightliner Sprinter 2500 Passenger have the same bolt pattern as the 2015?
The Freightliner Sprinter 2500 Passenger uses the 6x130 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Why is matching the 84.1mm center bore important for the 2015 Sprinter 2500 Passenger?
The 84.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2015 Freightliner Sprinter 2500 Passenger?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2015 Freightliner Sprinter 2500 Passenger?
Yes, but ensure the wheel spacers match the 6x130 bolt pattern and 84.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2015 Freightliner Sprinter 2500 Passenger?
The OEM offset for the 2015 Sprinter 2500 Passenger is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset