2020 Freightliner Sprinter 2500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Freightliner Sprinter 2500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 2500 Passenger — Year-Specific Fitment Context
The 2020 Freightliner Sprinter 2500 Passenger is in year 8 of 9 using the 6x130 pattern (2013–2021). Wheels from any 2013–2021 Freightliner Sprinter 2500 Passenger are cross-compatible with the 2020 model.
Freightliner Sprinter 2500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 2500 Passenger's wheel specifications have changed over the years. The 2020 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2020 Freightliner Sprinter 2500 Passenger
For your 2020 Freightliner Sprinter 2500 Passenger, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is 50mm. Deviating more than ±10mm may cause rubbing or clearance issues with brakes/suspension. Always use lug nuts with the correct 14x1.5 thread pitch and proper seat type (cone or ball seat) matching the wheel. Mismatched seats can lead to loosening or wheel loss. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 2500 Passenger appears from 2013 to 2021 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using steel wheels from older Sprinters (pre-2013) as they have a different center bore (82.0mm) and may require rings.
- ✅ Check brake caliper clearance when changing offset; some aftermarket wheels may require spacers or grinding.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Freightliner Sprinter 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2020 Freightliner Sprinter 2500 Passenger?
The 2020 Freightliner Sprinter 2500 Passenger uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Freightliner Sprinter 2500 Passenger have the same bolt pattern as the 2020?
The Freightliner Sprinter 2500 Passenger uses the 6x130 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2020 Freightliner Sprinter 2500 Passenger?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2020 Freightliner Sprinter 2500 Passenger?
Absolutely. Just ensure the aftermarket wheels have a 6x130 bolt pattern, an offset near 50mm, and a center bore of at least 84.1mm (using hub rings if larger).
What lug nut size does the 2020 Freightliner Sprinter 2500 Passenger use?
The 2020 Freightliner Sprinter 2500 Passenger uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2020 Freightliner?
The 2020 Sprinter 2500 Passenger uses a 6x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset