2020 Genesis G90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Genesis G90, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 G90 — Year-Specific Fitment Context
The 2020 Genesis G90 is in year 4 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Genesis G90 are cross-compatible with the 2020 model.
Genesis G90 Bolt Pattern by Year
The table below shows how the G90's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Genesis G90
For the 2020 Genesis G90, the 5x114.3 bolt pattern is shared with many vehicles, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure load is on the hub, not the lugs. Offset must stay within 35-50mm; deviations risk rubbing or poor handling. Always use 12x1.5 lug nuts with the correct seat—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Using the wrong seat can cause lug nut loosening or wheel damage. Verify lug nut type and torque to 80-90 ft-lbs.
Historical Fitment Data Reference
In our dataset, Genesis G90 appears from 2017 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel seating and thermal expansion.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is specific and rings are essential for safety.
- ✅ When installing aftermarket wheels, check that the lug nuts are ball seat (OEM) or conical (aftermarket) to match the wheel's lug seat design.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Genesis G90 — Frequently Asked Questions
What is the bolt pattern for a 2020 Genesis G90?
The 2020 Genesis G90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Genesis G90 have the same bolt pattern as the 2020?
The Genesis G90 uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 2020 G90?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2020 Genesis G90?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Genesis fit my 2020 G90?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the PCD for a 2020 Genesis G90?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 G90, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset