2016 GMC Sierra 3500 HD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 GMC Sierra 3500 HD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x180 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 44 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2016 Sierra 3500 HD Crew Cab — Year-Specific Fitment Context
The 2016 GMC Sierra 3500 HD Crew Cab is in year 6 of 14 using the 8x180 pattern (2011–2024). Wheels from any 2011–2024 GMC Sierra 3500 HD Crew Cab are cross-compatible with the 2016 model. Across its full production run (2007–2024), the Sierra 3500 HD Crew Cab has also used: 8x165.1.
GMC Sierra 3500 HD Crew Cab Bolt Pattern by Year
The table below shows how the Sierra 3500 HD Crew Cab's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| ▸ 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2020 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x180 Pattern Context
This bolt pattern appears on 247 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 8x180:
Expert Buying Guide for 2016 GMC Sierra 3500 HD Crew Cab
For the 2016 GMC Sierra 3500 HD Crew Cab, the 8x180 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings if the bore is larger. The factory offset is 44mm; deviations affect handling and clearance. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) seat nuts unless the wheel specifies ball seat. Improper lug nuts can cause wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Sierra 3500 HD Crew Cab appears from 2007 to 2024 (17 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a minimum load rating of 3,500 lbs each for this heavy-duty truck.
- ✅ Check for caliper clearance with offset changes; spacers may be needed for some aftermarket wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 GMC Sierra 3500 HD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2016 GMC Sierra 3500 HD Crew Cab?
The 2016 GMC Sierra 3500 HD Crew Cab uses a 8x180 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 44mm.
What other years of GMC Sierra 3500 HD Crew Cab have the same bolt pattern as the 2016?
The GMC Sierra 3500 HD Crew Cab uses the 8x180 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Will wheels from another GMC fit my 2016 Sierra 3500 HD Crew Cab?
Only if they share the exact same 8x180 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
What is the center bore of a 2016 GMC Sierra 3500 HD Crew Cab?
The factory center bore (hub bore) for the 2016 GMC Sierra 3500 HD Crew Cab is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2016 GMC Sierra 3500 HD Crew Cab?
The OEM offset for the 2016 Sierra 3500 HD Crew Cab is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2016 GMC Sierra 3500 HD Crew Cab?
Yes, but ensure the wheel spacers match the 8x180 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset