2010 GMC Sierra 3500 HD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 GMC Sierra 3500 HD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2010 Sierra 3500 HD Crew Cab — Year-Specific Fitment Context
The 2010 model year is the final year of the GMC Sierra 3500 HD Crew Cab's 8x165.1 bolt pattern run (since 2007). Wheels from any 2007–2010 GMC Sierra 3500 HD Crew Cab are cross-compatible with the 2010 model. Important: starting in 2011, GMC switched to 8x180 — those wheels will not fit the 2010 model. Across its full production run (2007–2024), the Sierra 3500 HD Crew Cab has also used: 8x180.
GMC Sierra 3500 HD Crew Cab Bolt Pattern by Year
The table below shows how the Sierra 3500 HD Crew Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| ▸ 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2020 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2010 GMC Sierra 3500 HD Crew Cab
For your 2010 GMC Sierra 3500 HD Crew Cab, the bolt pattern is 8x165.1mm with a critical center bore of 116.7mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 20-40mm; deviations risk rubbing or suspension damage. Use only 14x1.5 lug nuts with the correct seat type (cone or ball) to avoid loosening. Note: 2011+ models use 8x180mm—those wheels are incompatible. Always verify fitment before purchase.
Historical Fitment Data Reference
In our dataset, GMC Sierra 3500 HD Crew Cab appears from 2007 to 2024 (17 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 20mm; they may contact brake calipers or suspension components.
- ✅ Inspect wheel bore diameter; if larger than 116.7mm, install hub-centric rings to prevent vibrations.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 GMC Sierra 3500 HD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 GMC Sierra 3500 HD Crew Cab?
The 2010 GMC Sierra 3500 HD Crew Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of GMC Sierra 3500 HD Crew Cab have the same bolt pattern as the 2010?
The GMC Sierra 3500 HD Crew Cab uses the 8x165.1 pattern from 2007 through 2010. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will 2011 GMC Sierra 3500 HD Crew Cab wheels fit a 2010 model?
No. The 2011 GMC Sierra 3500 HD Crew Cab switched to a 8x180 bolt pattern, which is not compatible with the 2010 model's 8x165.1. Using mismatched patterns is unsafe.
Can I put aftermarket wheels on my 2010 GMC Sierra 3500 HD Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20-40mm, and a center bore of at least 116.7mm (using hub rings if larger).
How do I measure the bolt pattern on my 2010 GMC?
The 2010 Sierra 3500 HD Crew Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2010 GMC Sierra 3500 HD Crew Cab?
The factory center bore (hub bore) for the 2010 GMC Sierra 3500 HD Crew Cab is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset