2007 GMC Sierra 3500 HD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 GMC Sierra 3500 HD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2007 Sierra 3500 HD Crew Cab — Year-Specific Fitment Context
The 2007 model year marks the beginning of the GMC Sierra 3500 HD Crew Cab's 8x165.1 bolt pattern era, which continued through 2010 (4 consecutive years). Wheels from any 2007–2010 GMC Sierra 3500 HD Crew Cab are cross-compatible with the 2007 model. Across its full production run (2007–2024), the Sierra 3500 HD Crew Cab has also used: 8x180.
GMC Sierra 3500 HD Crew Cab Bolt Pattern by Year
The table below shows how the Sierra 3500 HD Crew Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2020 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2007 GMC Sierra 3500 HD Crew Cab
For your 2007 GMC Sierra 3500 HD Crew Cab, the 8x165.1 bolt pattern is shared with 2007–2010 models. The center bore is 116.7mm; aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibration and ensure proper load distribution. Offset must stay within 20–40mm to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (cone or ball seat) to match the wheel; mismatched seats can cause wheel loosening. Verify lug nut torque specifications and re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, GMC Sierra 3500 HD Crew Cab appears from 2007 to 2024 (17 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to account for wheel settling.
- ✅ Ensure aftermarket wheels have a center bore of at least 116.7mm; use hub-centric rings to fill any gap.
- ✅ Double-check offset: a lower offset (closer to 20mm) pushes wheels outward, which may require trimming or lift for clearance.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 GMC Sierra 3500 HD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 GMC Sierra 3500 HD Crew Cab?
The 2007 GMC Sierra 3500 HD Crew Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of GMC Sierra 3500 HD Crew Cab have the same bolt pattern as the 2007?
The GMC Sierra 3500 HD Crew Cab uses the 8x165.1 pattern from 2007 through 2010. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2007 GMC Sierra 3500 HD Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20-40mm, and a center bore of at least 116.7mm (using hub rings if larger).
Can I use spacers on my 2007 GMC Sierra 3500 HD Crew Cab?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 116.7mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the center bore of a 2007 GMC Sierra 3500 HD Crew Cab?
The factory center bore (hub bore) for the 2007 GMC Sierra 3500 HD Crew Cab is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another GMC fit my 2007 Sierra 3500 HD Crew Cab?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.7mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset