2026 GMC Sierra Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 GMC Sierra is 6x139.7 (6x5.5"). It has a center bore of 78.1 mm, an offset range of 24-31, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 GMC Sierra Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 78.1 mm |
| Offset Range (ET) | 24-31 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2026 Sierra — Year-Specific Fitment Context
The 2026 model year is the final year of the GMC Sierra's 6x139.7 bolt pattern run (since 2024). Wheels from any 2024–2026 GMC Sierra are cross-compatible with the 2026 model.
GMC Sierra Bolt Pattern by Year
Looking for all generations? View the complete GMC Sierra (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Sierra's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 GMC Sierra Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 GMC Sierra, donor rims must match the 6x139.7 PCD and have a center bore of at least 78.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Cadillac Escalade | 78.1 mm (Exact) | 24-31 | 14x1.5 (Flat) |
| 2025 Cadillac Escalade ESV | 78.1 mm (Exact) | 24-31 | 14x1.5 (Flat) |
| 2003 Chevrolet Astro Cargo | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2003 Chevrolet Astro Passenger | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2025 Chevrolet BrightDrop | 78.1 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 2025 Chevrolet Colorado | 78.1 mm (Exact) | 33 | 14x1.5 (Flat) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Nissan Titan Crew Cab | 110.1 mm | 110.1mm → 78.1mm |
25 |
| 2025 Tesla Cybertruck | 84.1 mm | 84.1mm → 78.1mm |
35-45 |
| 2020 Toyota 4Runner | 106.2 mm | 106.2mm → 78.1mm |
25-30 |
| 2005 Toyota Land Cruiser | 106.1 mm | 106.1mm → 78.1mm |
18 |
| 2023 Toyota Sequoia | 95.1 mm | 95.1mm → 78.1mm |
25 |
| 2025 Toyota Tacoma | 95.1 mm | 95.1mm → 78.1mm |
25-35 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 GMC Sierra — Frequently Asked Questions
What is the bolt pattern for a 2026 GMC Sierra?
The 2026 GMC Sierra uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 24-31mm.
What other years of GMC Sierra have the same bolt pattern as the 2026?
The GMC Sierra uses the 6x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 GMC?
The 2026 Sierra uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2026 GMC Sierra?
The OEM offset for the 2026 Sierra is typically around 24-31mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2026 GMC Sierra?
The factory center bore (hub bore) for the 2026 GMC Sierra is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2026 GMC Sierra use?
The 2026 GMC Sierra uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →