2024 Nissan Titan Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Nissan Titan Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Titan Crew Cab — Year-Specific Fitment Context
The 2024 model year is the final year of the Nissan Titan Crew Cab's 6x139.7 bolt pattern run (since 2004). Wheels from any 2004–2024 Nissan Titan Crew Cab are cross-compatible with the 2024 model.
Nissan Titan Crew Cab Bolt Pattern by Year
The table below shows how the Titan Crew Cab's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 77.8 | 25 |
| 2005 | 6x139.7 | 77.8 | 25 |
| 2006 | 6x139.7 | 77.8 | 25 |
| 2007 | 6x139.7 | 77.8 | 25 |
| 2008 | 6x139.7 | 77.8 | 25 |
| 2009 | 6x139.7 | 77.8 | 25 |
| 2010 | 6x139.7 | 77.8 | 25 |
| 2011 | 6x139.7 | 77.8 | 25 |
| 2012 | 6x139.7 | 77.8 | 25 |
| 2013 | 6x139.7 | 77.8 | 25 |
| 2014 | 6x139.7 | 77.8 | 25 |
| 2015 | 6x139.7 | 77.8 | 25 |
| 2017 | 6x139.7 | 77.8 | 25 |
| 2018 | 6x139.7 | 77.8 | 25 |
| 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| ▸ 2024 | 6x139.7 | 77.8 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2024 Nissan Titan Crew Cab
For your 2024 Nissan Titan Crew Cab, the critical fitment specs are: bolt pattern 6x139.7, center bore 77.8mm, offset 25mm, and lug nut size 12x1.25. The center bore is hub-centric, meaning the wheel centers on the hub. Aftermarket wheels often have a larger bore; you must use hub-centric rings (77.8mm ID to wheel bore OD) to prevent vibrations and ensure proper load transfer. Offset is sensitive: staying within ±5mm of 25mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always use the correct lug nuts: 12x1.25 thread pitch with either conical (60-degree) or ball seat, matching the wheel's seat type. Never use incorrect seat types—this can cause lug nut loosening or wheel damage. Safety first: improper fitment compromises vehicle control.
Historical Fitment Data Reference
In our dataset, Nissan Titan Crew Cab appears from 2004 to 2024 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating; use a torque wrench set to 98 ft-lbs (133 Nm).
- ✅ If using aftermarket wheels, verify that the wheel's hub bore is at least 77.8mm; if larger, install hub-centric rings to avoid vibrations.
- ✅ Check wheel clearance with the brake calipers and suspension components at full lock and compression; even a 5mm offset change can cause rubbing.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Nissan Titan Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2024 Nissan Titan Crew Cab?
The 2024 Nissan Titan Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan Titan Crew Cab have the same bolt pattern as the 2024?
The Nissan Titan Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the factory wheel offset for a 2024 Nissan Titan Crew Cab?
The OEM offset for the 2024 Titan Crew Cab is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2024 Nissan Titan Crew Cab?
The factory center bore (hub bore) for the 2024 Nissan Titan Crew Cab is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2024 Nissan Titan Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2024 Nissan Titan Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Titan Crew Cab, the PCD is 6x139.7.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset