2012 Nissan Titan Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Nissan Titan Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2012 Titan Crew Cab — Year-Specific Fitment Context
The 2012 Nissan Titan Crew Cab is in year 9 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 Nissan Titan Crew Cab are cross-compatible with the 2012 model.
Nissan Titan Crew Cab Bolt Pattern by Year
The table below shows how the Titan Crew Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 77.8 | 25 |
| 2005 | 6x139.7 | 77.8 | 25 |
| 2006 | 6x139.7 | 77.8 | 25 |
| 2007 | 6x139.7 | 77.8 | 25 |
| 2008 | 6x139.7 | 77.8 | 25 |
| 2009 | 6x139.7 | 77.8 | 25 |
| 2010 | 6x139.7 | 77.8 | 25 |
| 2011 | 6x139.7 | 77.8 | 25 |
| ▸ 2012 | 6x139.7 | 77.8 | 25 |
| 2013 | 6x139.7 | 77.8 | 25 |
| 2014 | 6x139.7 | 77.8 | 25 |
| 2015 | 6x139.7 | 77.8 | 25 |
| 2017 | 6x139.7 | 77.8 | 25 |
| 2018 | 6x139.7 | 77.8 | 25 |
| 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| 2024 | 6x139.7 | 77.8 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2012 Nissan Titan Crew Cab
For your 2012 Nissan Titan Crew Cab, the 6x139.7 bolt pattern is shared across 2004–2024 models, ensuring broad compatibility. However, the 77.8mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 78.1mm or 106.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 25mm offset maintains correct scrub radius and suspension geometry. Deviating more than ±10mm may cause rubbing or bearing stress. Always use 12x1.25 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball or flat seats. Never mix seat types, as improper seating can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Titan Crew Cab appears from 2004 to 2024 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50 miles of driving, then periodically check.
- ✅ If using aftermarket wheels, verify the center bore is ≥77.8mm and use hub-centric rings to match the 77.8mm hub.
- ✅ Avoid spacers unless hub-centric; they increase offset and may require longer studs, risking thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Nissan Titan Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 Nissan Titan Crew Cab?
The 2012 Nissan Titan Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan Titan Crew Cab have the same bolt pattern as the 2012?
The Nissan Titan Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Will wheels from another Nissan fit my 2012 Titan Crew Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
What is the factory wheel offset for a 2012 Nissan Titan Crew Cab?
The OEM offset for the 2012 Titan Crew Cab is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2012 Nissan Titan Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 25mm, and a center bore of at least 77.8mm (using hub rings if larger).
Do 2012 Nissan Titan Crew Cabs use lug bolts or lug nuts?
The 2012 Titan Crew Cab requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset