2006 Nissan Titan Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Nissan Titan Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2006 Titan Crew Cab — Year-Specific Fitment Context
The 2006 Nissan Titan Crew Cab is in year 3 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 Nissan Titan Crew Cab are cross-compatible with the 2006 model.
Nissan Titan Crew Cab Bolt Pattern by Year
The table below shows how the Titan Crew Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 77.8 | 25 |
| 2005 | 6x139.7 | 77.8 | 25 |
| ▸ 2006 | 6x139.7 | 77.8 | 25 |
| 2007 | 6x139.7 | 77.8 | 25 |
| 2008 | 6x139.7 | 77.8 | 25 |
| 2009 | 6x139.7 | 77.8 | 25 |
| 2010 | 6x139.7 | 77.8 | 25 |
| 2011 | 6x139.7 | 77.8 | 25 |
| 2012 | 6x139.7 | 77.8 | 25 |
| 2013 | 6x139.7 | 77.8 | 25 |
| 2014 | 6x139.7 | 77.8 | 25 |
| 2015 | 6x139.7 | 77.8 | 25 |
| 2017 | 6x139.7 | 77.8 | 25 |
| 2018 | 6x139.7 | 77.8 | 25 |
| 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| 2024 | 6x139.7 | 77.8 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2006 Nissan Titan Crew Cab
For your 2006 Nissan Titan Crew Cab, the 6x139.7 bolt pattern and 77.8mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 78.1mm or 106.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 25mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use the correct 12x1.25 lug nuts with a conical (60-degree) seat—never use ball-seat nuts. Re-torque after 50-100 miles. Wheels from 2004-2024 Titans are direct fit, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Nissan Titan Crew Cab appears from 2004 to 2024 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheel bore exceeds 77.8mm to avoid vibration.
- ✅ Stick to offsets between 15mm and 35mm to prevent rubbing on suspension or fenders.
- ✅ Re-torque lug nuts to 98 ft-lb after 50-100 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Nissan Titan Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Nissan Titan Crew Cab?
The 2006 Nissan Titan Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan Titan Crew Cab have the same bolt pattern as the 2006?
The Nissan Titan Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2006 Nissan Titan Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 77.8mm center bore important for the 2006 Titan Crew Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2006 Nissan Titan Crew Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 77.8mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the PCD for a 2006 Nissan Titan Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Titan Crew Cab, the PCD is 6x139.7.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset