2019 Nissan Titan Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan Titan Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2019 Titan Crew Cab — Year-Specific Fitment Context
The 2019 Nissan Titan Crew Cab is in year 16 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 Nissan Titan Crew Cab are cross-compatible with the 2019 model.
Nissan Titan Crew Cab Bolt Pattern by Year
The table below shows how the Titan Crew Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 77.8 | 25 |
| 2005 | 6x139.7 | 77.8 | 25 |
| 2006 | 6x139.7 | 77.8 | 25 |
| 2007 | 6x139.7 | 77.8 | 25 |
| 2008 | 6x139.7 | 77.8 | 25 |
| 2009 | 6x139.7 | 77.8 | 25 |
| 2010 | 6x139.7 | 77.8 | 25 |
| 2011 | 6x139.7 | 77.8 | 25 |
| 2012 | 6x139.7 | 77.8 | 25 |
| 2013 | 6x139.7 | 77.8 | 25 |
| 2014 | 6x139.7 | 77.8 | 25 |
| 2015 | 6x139.7 | 77.8 | 25 |
| 2017 | 6x139.7 | 77.8 | 25 |
| 2018 | 6x139.7 | 77.8 | 25 |
| ▸ 2019 | 6x139.7 | 77.8 | 25 |
| 2020 | 6x139.7 | 77.8 | 25 |
| 2021 | 6x139.7 | 77.8 | 25 |
| 2022 | 6x139.7 | 77.8 | 25 |
| 2023 | 6x139.7 | 77.8 | 25 |
| 2024 | 6x139.7 | 77.8 | 25 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2019 Nissan Titan Crew Cab
For the 2019 Nissan Titan Crew Cab, the 6x139.7 bolt pattern is shared across 2004–2024 models, ensuring broad compatibility. However, the 77.8mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset sensitivity is high; the factory 25mm offset should be maintained within ±5mm to avoid rubbing or suspension interference. Always use 12x1.25 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket wheels may require ball or conical seats. Never mix seat types; improper lug nut engagement can lead to wheel detachment. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Titan Crew Cab appears from 2004 to 2024 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50–100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 77.8mm bore is specific and mismatch causes steering wheel vibration.
- ✅ Check for brake caliper clearance when changing offset; the 2019 Titan has large calipers that may interfere with deep-dish wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Nissan Titan Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 Nissan Titan Crew Cab?
The 2019 Nissan Titan Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Nissan Titan Crew Cab have the same bolt pattern as the 2019?
The Nissan Titan Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the factory wheel offset for a 2019 Nissan Titan Crew Cab?
The OEM offset for the 2019 Titan Crew Cab is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 77.8mm center bore important for the 2019 Titan Crew Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 25mm offset mean for the 2019 Titan Crew Cab?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Will wheels from another Nissan fit my 2019 Titan Crew Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset