2001 GMC Sonoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 GMC Sonoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 0-13 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2001 Sonoma Regular Cab — Year-Specific Fitment Context
The 2001 GMC Sonoma Regular Cab is in year 10 of 12 using the 5x120.65 pattern (1992–2003). Wheels from any 1992–2003 GMC Sonoma Regular Cab are cross-compatible with the 2001 model.
GMC Sonoma Regular Cab Bolt Pattern by Year
The table below shows how the Sonoma Regular Cab's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 0-13 |
| 1993 | 5x120.65 | 70.3 | 0-13 |
| 1994 | 5x120.65 | 70.3 | 0-13 |
| 1995 | 5x120.65 | 70.3 | 0-13 |
| 1996 | 5x120.65 | 70.3 | 0-13 |
| 1997 | 5x120.65 | 70.3 | 0-13 |
| 1998 | 5x120.65 | 70.3 | 0-13 |
| 1999 | 5x120.65 | 70.3 | 0-13 |
| 2000 | 5x120.65 | 70.3 | 0-13 |
| ▸ 2001 | 5x120.65 | 70.3 | 0-13 |
| 2002 | 5x120.65 | 70.3 | 0-13 |
| 2003 | 5x120.65 | 70.3 | 0-13 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2001 GMC Sonoma Regular Cab
For your 2001 GMC Sonoma Regular Cab, the 5x120.65mm bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 72.6mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight: 0-13mm. Exceeding this can cause rubbing on suspension or fenders. Always use lug nuts with the correct 12x1.5 thread pitch and seat type (cone or ball seat) matching your wheels. Improper lug nuts can loosen or damage studs. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Sonoma Regular Cab appears from 1992 to 2003 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a larger bore than 70.3mm to avoid vibrations.
- ✅ Stick to offsets between 0-13mm; offsets outside this range may require spacers or cause clearance issues.
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 GMC Sonoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2001 GMC Sonoma Regular Cab?
The 2001 GMC Sonoma Regular Cab uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 0-13mm.
What other years of GMC Sonoma Regular Cab have the same bolt pattern as the 2001?
The GMC Sonoma Regular Cab uses the 5x120.65 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What lug nut size does the 2001 GMC Sonoma Regular Cab use?
The 2001 GMC Sonoma Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2001 GMC Sonoma Regular Cab?
The factory center bore (hub bore) for the 2001 GMC Sonoma Regular Cab is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2001 GMC Sonoma Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Sonoma Regular Cab, the PCD is 5x120.65.
How tight should I torque the lug nuts on a 2001 GMC Sonoma Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset