1993 GMC Sonoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 GMC Sonoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 0-13 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
1993 Sonoma Regular Cab — Year-Specific Fitment Context
The 1993 GMC Sonoma Regular Cab is in year 2 of 12 using the 5x120.65 pattern (1992–2003). Wheels from any 1992–2003 GMC Sonoma Regular Cab are cross-compatible with the 1993 model.
GMC Sonoma Regular Cab Bolt Pattern by Year
The table below shows how the Sonoma Regular Cab's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 0-13 |
| ▸ 1993 | 5x120.65 | 70.3 | 0-13 |
| 1994 | 5x120.65 | 70.3 | 0-13 |
| 1995 | 5x120.65 | 70.3 | 0-13 |
| 1996 | 5x120.65 | 70.3 | 0-13 |
| 1997 | 5x120.65 | 70.3 | 0-13 |
| 1998 | 5x120.65 | 70.3 | 0-13 |
| 1999 | 5x120.65 | 70.3 | 0-13 |
| 2000 | 5x120.65 | 70.3 | 0-13 |
| 2001 | 5x120.65 | 70.3 | 0-13 |
| 2002 | 5x120.65 | 70.3 | 0-13 |
| 2003 | 5x120.65 | 70.3 | 0-13 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 1993 GMC Sonoma Regular Cab
For your 1993 GMC Sonoma Regular Cab, the 5x120.65 bolt pattern is shared across 1992–2003 models, ensuring cross-compatibility. However, the 70.3mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight (0–13mm); staying within this range avoids rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (cone or ball seat) to prevent loosening or damage. Never reuse old lug nuts; torque to manufacturer specs.
Historical Fitment Data Reference
In our dataset, GMC Sonoma Regular Cab appears from 1992 to 2003 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Verify wheel bore diameter; if larger than 70.3mm, install hub-centric rings to avoid vibration.
- ✅ Check offset carefully: positive offset beyond 13mm may cause inner clearance issues; negative offset may cause outer rubbing.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 GMC Sonoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1993 GMC Sonoma Regular Cab?
The 1993 GMC Sonoma Regular Cab uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 0-13mm.
What other years of GMC Sonoma Regular Cab have the same bolt pattern as the 1993?
The GMC Sonoma Regular Cab uses the 5x120.65 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1993 GMC Sonoma Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 70.3mm center bore important for the 1993 Sonoma Regular Cab?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 1993 GMC Sonoma Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Sonoma Regular Cab, the PCD is 5x120.65.
Will wheels from another GMC fit my 1993 Sonoma Regular Cab?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset