1997 GMC Sonoma Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 GMC Sonoma Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 0-13 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 Sonoma Regular Cab — Year-Specific Fitment Context
The 1997 GMC Sonoma Regular Cab is in year 6 of 12 using the 5x120.65 pattern (1992–2003). Wheels from any 1992–2003 GMC Sonoma Regular Cab are cross-compatible with the 1997 model.
GMC Sonoma Regular Cab Bolt Pattern by Year
The table below shows how the Sonoma Regular Cab's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 0-13 |
| 1993 | 5x120.65 | 70.3 | 0-13 |
| 1994 | 5x120.65 | 70.3 | 0-13 |
| 1995 | 5x120.65 | 70.3 | 0-13 |
| 1996 | 5x120.65 | 70.3 | 0-13 |
| ▸ 1997 | 5x120.65 | 70.3 | 0-13 |
| 1998 | 5x120.65 | 70.3 | 0-13 |
| 1999 | 5x120.65 | 70.3 | 0-13 |
| 2000 | 5x120.65 | 70.3 | 0-13 |
| 2001 | 5x120.65 | 70.3 | 0-13 |
| 2002 | 5x120.65 | 70.3 | 0-13 |
| 2003 | 5x120.65 | 70.3 | 0-13 |
Fitment Notes
The 1997 GMC Sonoma Regular Cab has a bolt pattern of 5x120.65.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.75" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.75".
This means it is a 5 lug pattern with a circle diameter of 120.65mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, GMC Sonoma Regular Cab appears from 1992 to 2003 (12 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
1997 GMC Sonoma Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1997 GMC Sonoma Regular Cab?
The 1997 GMC Sonoma Regular Cab uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 0-13mm.
What other years of GMC Sonoma Regular Cab have the same bolt pattern as the 1997?
The GMC Sonoma Regular Cab uses the 5x120.65 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What does 0-13mm offset mean for the 1997 Sonoma Regular Cab?
An offset of 0-13mm means the wheel's mounting surface is 0-13mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
What is the PCD for a 1997 GMC Sonoma Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 Sonoma Regular Cab, the PCD is 5x120.65.
Can I put aftermarket wheels on my 1997 GMC Sonoma Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x120.65 bolt pattern, an offset near 0-13mm, and a center bore of at least 70.3mm (using hub rings if larger).
What is the factory wheel offset for a 1997 GMC Sonoma Regular Cab?
The OEM offset for the 1997 Sonoma Regular Cab is typically around 0-13mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
GMC Sonoma Regular Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2003 (12 model years).
- Observed bolt-pattern variants: 1 (5x120.65).
- Observed total offset span across years: 13.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1997 GMC Sonoma Regular Cab, please report it via our About page contact so we can verify and update this record.