2014 Honda CR-Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Honda CR-Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 CR-Z — Year-Specific Fitment Context
The 2014 Honda CR-Z is in year 4 of 6 using the 5x114.3 pattern (2011–2016). Wheels from any 2011–2016 Honda CR-Z are cross-compatible with the 2014 model.
Honda CR-Z Bolt Pattern by Year
The table below shows how the CR-Z's wheel specifications have changed over the years. The 2014 model year is highlighted.
Fitment Notes
The 2014 Honda CR-Z has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Honda CR-Z appears from 2011 to 2016 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2014 Honda CR-Z — Frequently Asked Questions
What is the bolt pattern for a 2014 Honda CR-Z?
The 2014 Honda CR-Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 55mm.
What other years of Honda CR-Z have the same bolt pattern as the 2014?
The Honda CR-Z uses the 5x114.3 pattern from 2011 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2014 Honda CR-Z?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2014 Honda CR-Z?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 CR-Z, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2014 Honda?
The 2014 CR-Z uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2014 Honda CR-Z?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 55mm, and a center bore of at least 64.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Honda CR-Z is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2011-2016 (6 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2014 Honda CR-Z, please report it via our About page contact so we can verify and update this record.