2010 Honda Fit Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Honda Fit, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Fit — Year-Specific Fitment Context
The 2010 Honda Fit is in year 4 of 14 using the 4x100 pattern (2007–2020). Wheels from any 2007–2020 Honda Fit are cross-compatible with the 2010 model.
Honda Fit Bolt Pattern by Year
The table below shows how the Fit's wheel specifications have changed over the years. The 2010 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2010 Honda Fit
The 2010 Honda Fit uses a 4x100 bolt pattern with a 56.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The recommended offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type—use conical (60-degree) or ball seat nuts as specified. Improper lug nuts can lead to wheel detachment. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Honda Fit appears from 2007 to 2020 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on hubs.
- ✅ Check for brake caliper clearance when using wheels with offset below 40mm or above 50mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Honda Fit — Frequently Asked Questions
What is the bolt pattern for a 2010 Honda Fit?
The 2010 Honda Fit uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45mm.
What other years of Honda Fit have the same bolt pattern as the 2010?
The Honda Fit uses the 4x100 pattern from 2007 through 2020. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I use spacers on my 2010 Honda Fit?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Do 2010 Honda Fits use lug bolts or lug nuts?
The 2010 Fit requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 56.1mm center bore important for the 2010 Fit?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2010 Honda Fit?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Fit, the PCD is 4x100.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset