2011 Honda Insight Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Honda Insight, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Insight — Year-Specific Fitment Context
The 2011 Honda Insight is in year 12 of 15 using the 4x100 pattern (2000–2014). Wheels from any 2000–2014 Honda Insight are cross-compatible with the 2011 model. Across its full production run (2000–2023), the Insight has also used: 5x114.3.
Honda Insight Bolt Pattern by Year
The table below shows how the Insight's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 4x100 | 56.1 | 46 |
| 2001 | 4x100 | 56.1 | 46 |
| 2002 | 4x100 | 56.1 | 46 |
| 2003 | 4x100 | 56.1 | 46 |
| 2004 | 4x100 | 56.1 | 46 |
| 2005 | 4x100 | 56.1 | 46 |
| 2006 | 4x100 | 56.1 | 46 |
| 2010 | 4x100 | 56.1 | 46 |
| ▸ 2011 | 4x100 | 56.1 | 46 |
| 2012 | 4x100 | 56.1 | 46 |
| 2013 | 4x100 | 56.1 | 46 |
| 2014 | 4x100 | 56.1 | 46 |
| 2019 | 5x114.3 | 64.1 | 35-45mm |
| 2020 | 5x114.3 | 64.1 | 35-45mm |
| 2021 | 5x114.3 | 64.1 | 35-45mm |
| 2022 | 5x114.3 | 64.1 | 35-45mm |
| 2023 | 5x114.3 | 64.1 | 35-45mm |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2011 Honda Insight
The 2011 Honda Insight uses a 4x100 bolt pattern with a 56.1mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—cone seat for most aftermarket wheels, ball seat for OEM. Improper lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Honda Insight appears from 2000 to 2023 (17 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles to account for settling.
- ✅ Verify wheel clearance with the front strut and rear trailing arm; 17x7.5” wheels with 40mm offset may require rolling fenders.
- ✅ Use hub-centric rings (56.1mm ID to aftermarket bore) to avoid steering wheel vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Honda Insight — Frequently Asked Questions
What is the bolt pattern for a 2011 Honda Insight?
The 2011 Honda Insight uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 46mm.
What other years of Honda Insight have the same bolt pattern as the 2011?
The Honda Insight uses the 4x100 pattern from 2000 through 2014. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2011 Honda Insight?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 56.1mm (using hub rings if larger).
Do 2011 Honda Insights use lug bolts or lug nuts?
The 2011 Insight requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2011 Honda Insight?
The OEM offset for the 2011 Insight is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 56.1mm center bore important for the 2011 Insight?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset