2010 Honda Insight Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Honda Insight, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Insight — Year-Specific Fitment Context
The 2010 Honda Insight is in year 11 of 15 using the 4x100 pattern (2000–2014). Wheels from any 2000–2014 Honda Insight are cross-compatible with the 2010 model. Across its full production run (2000–2023), the Insight has also used: 5x114.3.
Honda Insight Bolt Pattern by Year
The table below shows how the Insight's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 4x100 | 56.1 | 46 |
| 2001 | 4x100 | 56.1 | 46 |
| 2002 | 4x100 | 56.1 | 46 |
| 2003 | 4x100 | 56.1 | 46 |
| 2004 | 4x100 | 56.1 | 46 |
| 2005 | 4x100 | 56.1 | 46 |
| 2006 | 4x100 | 56.1 | 46 |
| ▸ 2010 | 4x100 | 56.1 | 46 |
| 2011 | 4x100 | 56.1 | 46 |
| 2012 | 4x100 | 56.1 | 46 |
| 2013 | 4x100 | 56.1 | 46 |
| 2014 | 4x100 | 56.1 | 46 |
| 2019 | 5x114.3 | 64.1 | 35-45mm |
| 2020 | 5x114.3 | 64.1 | 35-45mm |
| 2021 | 5x114.3 | 64.1 | 35-45mm |
| 2022 | 5x114.3 | 64.1 | 35-45mm |
| 2023 | 5x114.3 | 64.1 | 35-45mm |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2010 Honda Insight
For the 2010 Honda Insight, the bolt pattern is 4x100 with a center bore of 56.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 46mm; offsets between 40-50mm typically fit without rubbing. Avoid offsets below 35mm to prevent tire contact with fenders. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone seat for most aftermarket wheels; ball seat for OEM). Improper lug nuts can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Honda Insight appears from 2000 to 2023 (17 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels with a larger center bore, always install hub-centric rings (56.1mm ID to wheel's bore OD) to avoid steering wheel vibration.
- ✅ Verify wheel offset using a test fit; the 2010 Insight has limited clearance, so offsets below 40mm may require fender rolling or negative camber.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Honda Insight — Frequently Asked Questions
What is the bolt pattern for a 2010 Honda Insight?
The 2010 Honda Insight uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 46mm.
What other years of Honda Insight have the same bolt pattern as the 2010?
The Honda Insight uses the 4x100 pattern from 2000 through 2014. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2010 Honda Insight?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 46mm offset mean for the 2010 Insight?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
What lug nut size does the 2010 Honda Insight use?
The 2010 Honda Insight uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2010 Honda Insight?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 56.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset