1998 Honda Odyssey Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Honda Odyssey, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1998 Odyssey — Year-Specific Fitment Context
The 1998 Honda Odyssey is in year 4 of 23 using the 5x114.3 pattern (1995–2017). Wheels from any 1995–2017 Honda Odyssey are cross-compatible with the 1998 model. Across its full production run (1995–2024), the Odyssey has also used: 5x120.
Honda Odyssey Bolt Pattern by Year
The table below shows how the Odyssey's wheel specifications have changed over the years. The 1998 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 50 |
| 1996 | 5x114.3 | 64.1 | 50 |
| 1997 | 5x114.3 | 64.1 | 50 |
| ▸ 1998 | 5x114.3 | 64.1 | 50 |
| 1999 | 5x114.3 | 64.1 | 50 |
| 2000 | 5x114.3 | 64.1 | 50 |
| 2001 | 5x114.3 | 64.1 | 50 |
| 2002 | 5x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1998 Honda Odyssey
For the 1998 Honda Odyssey, the 5x114.3 bolt pattern is shared with 1995-2017 models, ensuring cross-compatibility. The 64.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration. Offset is critical: stock is 50mm; aftermarket wheels should stay within 45-55mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat, matching the wheel). Improper lug nuts can cause wheel loosening. Re-torque after 50-100 miles. Avoid wheels with a larger center bore without rings.
Historical Fitment Data Reference
In our dataset, Honda Odyssey appears from 1995 to 2024 (30 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (64.1mm ID to aftermarket bore) to prevent vibration and ensure proper load distribution.
- ✅ Stick to offset between 45-55mm; lower offsets may rub suspension or fenders, higher offsets may contact brake calipers.
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles; use a torque wrench to avoid over-tightening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Honda Odyssey — Frequently Asked Questions
What is the bolt pattern for a 1998 Honda Odyssey?
The 1998 Honda Odyssey uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Odyssey have the same bolt pattern as the 1998?
The Honda Odyssey uses the 5x114.3 pattern from 1995 through 2017. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What is the factory wheel offset for a 1998 Honda Odyssey?
The OEM offset for the 1998 Odyssey is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 1998 Honda Odyssey use?
The 1998 Honda Odyssey uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 1998 Honda Odyssey?
The factory center bore (hub bore) for the 1998 Honda Odyssey is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 1998 Honda Odyssey?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset