2012 Honda Odyssey Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Honda Odyssey, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Odyssey — Year-Specific Fitment Context
The 2012 Honda Odyssey is in year 18 of 23 using the 5x114.3 pattern (1995–2017). Wheels from any 1995–2017 Honda Odyssey are cross-compatible with the 2012 model. Across its full production run (1995–2024), the Odyssey has also used: 5x120.
Honda Odyssey Bolt Pattern by Year
The table below shows how the Odyssey's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 50 |
| 1996 | 5x114.3 | 64.1 | 50 |
| 1997 | 5x114.3 | 64.1 | 50 |
| 1998 | 5x114.3 | 64.1 | 50 |
| 1999 | 5x114.3 | 64.1 | 50 |
| 2000 | 5x114.3 | 64.1 | 50 |
| 2001 | 5x114.3 | 64.1 | 50 |
| 2002 | 5x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| ▸ 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Honda Odyssey
The 2012 Honda Odyssey uses a 5x114.3 bolt pattern with a 64.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Never reuse old lug nuts with new wheels. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Honda Odyssey appears from 1995 to 2024 (30 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 64.1mm without hub-centric rings.
- ✅ Verify offset clearance with the strut and fender; a 5mm spacer may be needed for some aftermarket wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Honda Odyssey — Frequently Asked Questions
What is the bolt pattern for a 2012 Honda Odyssey?
The 2012 Honda Odyssey uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Odyssey have the same bolt pattern as the 2012?
The Honda Odyssey uses the 5x114.3 pattern from 1995 through 2017. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What lug nut size does the 2012 Honda Odyssey use?
The 2012 Honda Odyssey uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2012 Honda Odyssey?
The factory center bore (hub bore) for the 2012 Honda Odyssey is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2012 Honda Odyssey?
The OEM offset for the 2012 Odyssey is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2012 Honda?
The 2012 Odyssey uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset