2008 Honda Odyssey Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Honda Odyssey, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Odyssey — Year-Specific Fitment Context
The 2008 Honda Odyssey is in year 14 of 23 using the 5x114.3 pattern (1995–2017). Wheels from any 1995–2017 Honda Odyssey are cross-compatible with the 2008 model. Across its full production run (1995–2024), the Odyssey has also used: 5x120.
Honda Odyssey Bolt Pattern by Year
The table below shows how the Odyssey's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 50 |
| 1996 | 5x114.3 | 64.1 | 50 |
| 1997 | 5x114.3 | 64.1 | 50 |
| 1998 | 5x114.3 | 64.1 | 50 |
| 1999 | 5x114.3 | 64.1 | 50 |
| 2000 | 5x114.3 | 64.1 | 50 |
| 2001 | 5x114.3 | 64.1 | 50 |
| 2002 | 5x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| ▸ 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Honda Odyssey
The 2008 Honda Odyssey uses a 5x114.3 bolt pattern with a 64.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper) to avoid wheel loosening. Verify that aftermarket wheels are hub-centric or use compatible rings. Failure to adhere to these specifications compromises safety and drivability.
Historical Fitment Data Reference
In our dataset, Honda Odyssey appears from 1995 to 2024 (30 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check inner clearance for aftermarket wheels; the 2008 Odyssey has limited space near the strut and brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Honda Odyssey — Frequently Asked Questions
What is the bolt pattern for a 2008 Honda Odyssey?
The 2008 Honda Odyssey uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Odyssey have the same bolt pattern as the 2008?
The Honda Odyssey uses the 5x114.3 pattern from 1995 through 2017. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Honda Odyssey?
The OEM offset for the 2008 Odyssey is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2008 Honda Odyssey use?
The 2008 Honda Odyssey uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 50mm offset mean for the 2008 Odyssey?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
What is the PCD for a 2008 Honda Odyssey?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Odyssey, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset