2010 Honda Ridgeline Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Honda Ridgeline, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Ridgeline — Year-Specific Fitment Context
The 2010 Honda Ridgeline is in year 5 of 19 using the 5x120 pattern (2006–2024). Wheels from any 2006–2024 Honda Ridgeline are cross-compatible with the 2010 model.
Honda Ridgeline Bolt Pattern by Year
The table below shows how the Ridgeline's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x120 | 64.1 | 45 |
| 2007 | 5x120 | 64.1 | 45 |
| 2008 | 5x120 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| ▸ 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| 2014 | 5x120 | 64.1 | 45 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2010 Honda Ridgeline
For the 2010 Honda Ridgeline, the 5x120 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviating more than ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Using the wrong lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Honda Ridgeline appears from 2006 to 2024 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 64.1mm and outer diameter matches wheel bore.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not exceed 5mm to maintain proper offset.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Honda Ridgeline — Frequently Asked Questions
What is the bolt pattern for a 2010 Honda Ridgeline?
The 2010 Honda Ridgeline uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda Ridgeline have the same bolt pattern as the 2010?
The Honda Ridgeline uses the 5x120 pattern from 2006 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Honda Ridgeline?
The OEM offset for the 2010 Ridgeline is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2010 Honda Ridgelines use lug bolts or lug nuts?
The 2010 Ridgeline requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2010 Honda Ridgeline use?
The 2010 Honda Ridgeline uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2010 Honda Ridgeline?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset