2008 Honda Ridgeline Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Honda Ridgeline, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Ridgeline — Year-Specific Fitment Context
The 2008 Honda Ridgeline is in year 3 of 19 using the 5x120 pattern (2006–2024). Wheels from any 2006–2024 Honda Ridgeline are cross-compatible with the 2008 model.
Honda Ridgeline Bolt Pattern by Year
The table below shows how the Ridgeline's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x120 | 64.1 | 45 |
| 2007 | 5x120 | 64.1 | 45 |
| ▸ 2008 | 5x120 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| 2014 | 5x120 | 64.1 | 45 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2008 Honda Ridgeline
When selecting aftermarket wheels for your 2008 Honda Ridgeline, the 64.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 14x1.50 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen or damage the wheel. Re-torque after 50-100 miles. Avoid wheels with insufficient brake clearance, especially for larger calipers.
Historical Fitment Data Reference
In our dataset, Honda Ridgeline appears from 2006 to 2024 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (64.1mm ID to aftermarket bore) to eliminate vibration and center the wheel properly.
- ✅ Stick to offsets between 40-50mm to avoid rubbing on suspension or fenders; verify clearance with a test fit.
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles; use a torque wrench to prevent over-tightening.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Honda Ridgeline — Frequently Asked Questions
What is the bolt pattern for a 2008 Honda Ridgeline?
The 2008 Honda Ridgeline uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda Ridgeline have the same bolt pattern as the 2008?
The Honda Ridgeline uses the 5x120 pattern from 2006 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Honda Ridgeline?
The OEM offset for the 2008 Ridgeline is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2008 Honda Ridgeline use?
The 2008 Honda Ridgeline uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 45mm offset mean for the 2008 Ridgeline?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
How do I measure the bolt pattern on my 2008 Honda?
The 2008 Ridgeline uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset