2024 Hyundai Sonata Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Hyundai Sonata Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Sonata Hybrid — Year-Specific Fitment Context
The 2024 model year is the final year of the Hyundai Sonata Hybrid's 5x114.3 bolt pattern run (since 2016). Wheels from any 2016–2024 Hyundai Sonata Hybrid are cross-compatible with the 2024 model.
Hyundai Sonata Hybrid Bolt Pattern by Year
The table below shows how the Sonata Hybrid's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Hyundai Sonata Hybrid
The 2024 Hyundai Sonata Hybrid uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. Offset must stay within 35-50mm; deviations risk rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and proper seat type (conical or ball seat) to avoid wheel loosening. Failure to match these specs compromises safety and may void warranty.
Historical Fitment Data Reference
In our dataset, Hyundai Sonata Hybrid appears from 2016 to 2024 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with a center bore larger than 67.1mm without hub rings; even 0.5mm mismatch can cause vibration.
- ✅ Double-check offset: too low (under 35mm) may rub suspension; too high (over 50mm) may contact brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Hyundai Sonata Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2024 Hyundai Sonata Hybrid?
The 2024 Hyundai Sonata Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Sonata Hybrid have the same bolt pattern as the 2024?
The Hyundai Sonata Hybrid uses the 5x114.3 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 Hyundai?
The 2024 Sonata Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2024 Hyundai Sonata Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Sonata Hybrid, the PCD is 5x114.3.
What does 35-50mm offset mean for the 2024 Sonata Hybrid?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Can I use spacers on my 2024 Hyundai Sonata Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset