2017 Hyundai Sonata Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Hyundai Sonata Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 Sonata Hybrid — Year-Specific Fitment Context
The 2017 Hyundai Sonata Hybrid is in year 2 of 9 using the 5x114.3 pattern (2016–2024). Wheels from any 2016–2024 Hyundai Sonata Hybrid are cross-compatible with the 2017 model.
Hyundai Sonata Hybrid Bolt Pattern by Year
The table below shows how the Sonata Hybrid's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Hyundai Sonata Hybrid
For your 2017 Hyundai Sonata Hybrid, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibrations and ensure proper load distribution. Offset must stay within 35-50mm; deviating risks rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use conical (60-degree) seats, while aftermarket may require ball or conical seats. Mismatched lug nuts can cause wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Hyundai Sonata Hybrid appears from 2016 to 2024 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is specific to this generation.
- ✅ Check inner clearance for offset near 35mm; aftermarket brakes may require spacers or higher offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Hyundai Sonata Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2017 Hyundai Sonata Hybrid?
The 2017 Hyundai Sonata Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Sonata Hybrid have the same bolt pattern as the 2017?
The Hyundai Sonata Hybrid uses the 5x114.3 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the factory wheel offset for a 2017 Hyundai Sonata Hybrid?
The OEM offset for the 2017 Sonata Hybrid is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2017 Hyundai Sonata Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2017 Hyundai Sonata Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2017 Hyundai Sonata Hybrids use lug bolts or lug nuts?
The 2017 Sonata Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset