2013 INFINITI EX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 INFINITI EX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 EX — Year-Specific Fitment Context
The 2013 model year is the final year of the INFINITI EX's 5x114.3 bolt pattern run (since 2008). Wheels from any 2008–2013 INFINITI EX are cross-compatible with the 2013 model.
INFINITI EX Bolt Pattern by Year
The table below shows how the EX's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 INFINITI EX has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, INFINITI EX appears from 2008 to 2013 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2013 INFINITI EX — Frequently Asked Questions
What is the bolt pattern for a 2013 INFINITI EX?
The 2013 INFINITI EX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI EX have the same bolt pattern as the 2013?
The INFINITI EX uses the 5x114.3 pattern from 2008 through 2013. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Do 2013 INFINITI EXs use lug bolts or lug nuts?
The 2013 EX requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2013 INFINITI EX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 EX, the PCD is 5x114.3.
What lug nut size does the 2013 INFINITI EX use?
The 2013 INFINITI EX uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2013 INFINITI EX?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
INFINITI EX is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2008-2013 (6 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 INFINITI EX, please report it via our About page contact so we can verify and update this record.