2008 Jeep Patriot Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Jeep Patriot, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Patriot — Year-Specific Fitment Context
The 2008 Jeep Patriot is in year 2 of 11 using the 5x114.3 pattern (2007–2017). Wheels from any 2007–2017 Jeep Patriot are cross-compatible with the 2008 model.
Jeep Patriot Bolt Pattern by Year
The table below shows how the Patriot's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Jeep Patriot
For your 2008 Jeep Patriot, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical: stock is around 40mm. Deviating significantly can cause rubbing or clearance issues with suspension and brakes. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat lugs as specified by the wheel manufacturer. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2007-2017 Patriots are direct fit.
Historical Fitment Data Reference
In our dataset, Jeep Patriot appears from 2007 to 2017 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 67.1mm to avoid vibrations.
- ✅ Stick within ±5mm of the stock 40mm offset to prevent rubbing on struts or fenders.
- ✅ Re-torque lug nuts to 95-110 ft-lbs after 50-100 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Jeep Patriot — Frequently Asked Questions
What is the bolt pattern for a 2008 Jeep Patriot?
The 2008 Jeep Patriot uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40mm.
What other years of Jeep Patriot have the same bolt pattern as the 2008?
The Jeep Patriot uses the 5x114.3 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What does 40mm offset mean for the 2008 Patriot?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jeep.
Why is matching the 67.1mm center bore important for the 2008 Patriot?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2008 Jeep Patriot?
The factory center bore (hub bore) for the 2008 Jeep Patriot is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2008 Jeep Patriot?
The OEM offset for the 2008 Patriot is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset