2024 Kia Sorento Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Kia Sorento Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Sorento Hybrid — Year-Specific Fitment Context
The 2024 model year is the final year of the Kia Sorento Hybrid's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2024 Kia Sorento Hybrid are cross-compatible with the 2024 model.
Kia Sorento Hybrid Bolt Pattern by Year
The table below shows how the Sorento Hybrid's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Kia Sorento Hybrid
For the 2024 Kia Sorento Hybrid, the center bore is 67.1mm. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure proper load distribution. Offset must stay within 35-50mm; deviations risk rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use conical (60-degree) seats; aftermarket wheels may require ball or conical seats. Mismatched lug nuts can cause wheel loosening or damage. Verify compatibility with 2021-2024 Sorento Hybrid models for direct fitment.
Historical Fitment Data Reference
In our dataset, Kia Sorento Hybrid appears from 2021 to 2024 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is critical for centering.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as the Sorento Hybrid has large front brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Kia Sorento Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2024 Kia Sorento Hybrid?
The 2024 Kia Sorento Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Sorento Hybrid have the same bolt pattern as the 2024?
The Kia Sorento Hybrid uses the 5x114.3 pattern from 2021 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 Kia Sorento Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2024 Kia Sorento Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Sorento Hybrid, the PCD is 5x114.3.
Do 2024 Kia Sorento Hybrids use lug bolts or lug nuts?
The 2024 Sorento Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2024 Kia Sorento Hybrid?
The factory center bore (hub bore) for the 2024 Kia Sorento Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset