2026 Kia Sorento Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Kia Sorento Hybrid is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Kia Sorento Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Sorento Hybrid — Year-Specific Fitment Context
The 2026 model year is the final year of the Kia Sorento Hybrid's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2026 Kia Sorento Hybrid are cross-compatible with the 2026 model.
Kia Sorento Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Kia Sorento Hybrid (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the Sorento Hybrid's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Kia Sorento Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Kia Sorento Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Aston Martin DB11 | 67.1 mm (Exact) | 35-45mm | 14x1.5 (Ball) |
| 2008 Aston Martin Vantage | 67.1 mm (Exact) | 50 | B 14x2.00 (Cone) |
| 2010 Dodge Avenger | 67.1 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2018 Aston Martin Vanquish S | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Kia Sorento Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2026 Kia Sorento Hybrid?
The 2026 Kia Sorento Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Sorento Hybrid have the same bolt pattern as the 2026?
The Kia Sorento Hybrid uses the 5x114.3 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Kia fit my 2026 Sorento Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2026 Kia Sorento Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the PCD for a 2026 Kia Sorento Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Sorento Hybrid, the PCD is 5x114.3.
What is the center bore of a 2026 Kia Sorento Hybrid?
The factory center bore (hub bore) for the 2026 Kia Sorento Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →