2020 Kia Telluride Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Kia Telluride, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Telluride — Year-Specific Fitment Context
The 2020 model year marks the beginning of the Kia Telluride's 5x114.3 bolt pattern era, which continued through 2024 (5 consecutive years). Wheels from any 2020–2024 Kia Telluride are cross-compatible with the 2020 model.
Kia Telluride Bolt Pattern by Year
The table below shows how the Telluride's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Kia Telluride
For your 2020 Kia Telluride, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm to wheel bore) are mandatory to prevent vibrations and ensure load is on the hub, not the lugs. Offset must stay within 35-50mm; lower offset pushes wheels outward (aggressive stance) but may cause rubbing, while higher offset tucks them in. Always use 12x1.5 lug nuts with the correct seat—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball or conical seats. Never mix seat types. Safety first: improper fitment can lead to wheel loss.
Historical Fitment Data Reference
In our dataset, Kia Telluride appears from 2020 to 2024 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is specific to Kia/Hyundai.
- ✅ Check brake caliper clearance when using wheels with offset below 40mm, as the Telluride has large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Kia Telluride — Frequently Asked Questions
What is the bolt pattern for a 2020 Kia Telluride?
The 2020 Kia Telluride uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Telluride have the same bolt pattern as the 2020?
The Kia Telluride uses the 5x114.3 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What lug nut size does the 2020 Kia Telluride use?
The 2020 Kia Telluride uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2020 Kia Telluride?
The OEM offset for the 2020 Telluride is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-50mm offset mean for the 2020 Telluride?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
What is the PCD for a 2020 Kia Telluride?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Telluride, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset