2026 Kia Telluride Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Kia Telluride is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2026 Kia Telluride Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Telluride — Year-Specific Fitment Context
The 2026 model year is the final year of the Kia Telluride's 5x114.3 bolt pattern run (since 2020). Wheels from any 2020–2026 Kia Telluride are cross-compatible with the 2026 model.
Kia Telluride Bolt Pattern by Year
Looking for all generations? View the complete Kia Telluride (2020–2026) Bolt Pattern & Generation Guide →
The table below shows how the Telluride's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Kia Telluride Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Kia Telluride, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2022 Ferrari 812 Competizione | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2022 Ferrari 812 Competizione A | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2022 Ferrari 812 GTS | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2021 Ferrari 812 Superfast | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2017 Ferrari California | 67.1 mm (Exact) | 44 front, 53 rear | N 14x1.50 (Cone) |
| 2025 Ferrari Daytona SP3 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Ford Explorer | 87.1 mm | 87.1mm → 67.1mm |
44 |
| 1993 Ford Mustang | 70.3 mm | 70.3mm → 67.1mm |
30 |
| 2025 Ford Mustang GTD | 70.5 mm | 70.5mm → 67.1mm |
Not Applicable |
| 1994 Ford Ranger Regular Cab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1996 Ford Ranger SuperCab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Kia Telluride — Frequently Asked Questions
What is the bolt pattern for a 2026 Kia Telluride?
The 2026 Kia Telluride uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of Kia Telluride have the same bolt pattern as the 2026?
The Kia Telluride uses the 5x114.3 pattern from 2020 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the PCD for a 2026 Kia Telluride?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Telluride, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 2026 Kia Telluride?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Kia Telluride use?
The 2026 Kia Telluride uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2026 Kia Tellurides use lug bolts or lug nuts?
The 2026 Telluride requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →