2021 Kia Telluride Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Kia Telluride, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2021 Telluride — Year-Specific Fitment Context
The 2021 Kia Telluride is in year 2 of 5 using the 5x114.3 pattern (2020–2024). Wheels from any 2020–2024 Kia Telluride are cross-compatible with the 2021 model.
Kia Telluride Bolt Pattern by Year
The table below shows how the Telluride's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2021 Kia Telluride
For your 2021 Kia Telluride, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm ID to wheel bore OD) are mandatory to prevent vibrations and ensure proper load transfer. Offset must stay within 35-50mm; deviating risks rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use conical (60-degree) seats. Never mix seat types; incorrect lug nuts can loosen or damage wheels. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Kia Telluride appears from 2020 to 2024 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles, then periodically check.
- ✅ Avoid wheels with offset below 35mm; they may contact brake calipers or struts.
- ✅ If using aftermarket wheels, ensure they are hub-centric or use proper rings; vibration at highway speeds indicates a bore mismatch.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Kia Telluride — Frequently Asked Questions
What is the bolt pattern for a 2021 Kia Telluride?
The 2021 Kia Telluride uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Telluride have the same bolt pattern as the 2021?
The Kia Telluride uses the 5x114.3 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
Do 2021 Kia Tellurides use lug bolts or lug nuts?
The 2021 Telluride requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 35-50mm offset mean for the 2021 Telluride?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
How do I measure the bolt pattern on my 2021 Kia?
The 2021 Telluride uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2021 Kia Telluride?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2021 Telluride, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset