2000 Lexus SC Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Lexus SC, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 SC — Year-Specific Fitment Context
The 2000 Lexus SC is in year 9 of 19 using the 5x114.3 pattern (1992–2010). Wheels from any 1992–2010 Lexus SC are cross-compatible with the 2000 model.
Lexus SC Bolt Pattern by Year
The table below shows how the SC's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 60.1 | 50 |
| 1993 | 5x114.3 | 60.1 | 50 |
| 1994 | 5x114.3 | 60.1 | 50 |
| 1995 | 5x114.3 | 60.1 | 50 |
| 1996 | 5x114.3 | 60.1 | 50 |
| 1997 | 5x114.3 | 60.1 | 50 |
| 1998 | 5x114.3 | 60.1 | 50 |
| 1999 | 5x114.3 | 60.1 | 50 |
| ▸ 2000 | 5x114.3 | 60.1 | 50 |
| 2002 | 5x114.3 | 60.1 | 45 |
| 2003 | 5x114.3 | 60.1 | 45 |
| 2004 | 5x114.3 | 60.1 | 45 |
| 2005 | 5x114.3 | 60.1 | 45 |
| 2006 | 5x114.3 | 60.1 | 45 |
| 2007 | 5x114.3 | 60.1 | 45 |
| 2008 | 5x114.3 | 60.1 | 45 |
| 2009 | 5x114.3 | 60.1 | 45 |
| 2010 | 5x114.3 | 60.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Lexus SC
For the 2000 Lexus SC, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify spoke clearance against brake calipers. Use only 12x1.50 lug nuts with the correct seat type—factory wheels use a ball seat, while aftermarket wheels typically require a conical (60-degree) seat. Mixing seat types can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Lexus SC appears from 1992 to 2010 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 60.1mm hub bore.
- ✅ Check for caliper clearance with low-offset wheels; spacers may be needed but require extended studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Lexus SC — Frequently Asked Questions
What is the bolt pattern for a 2000 Lexus SC?
The 2000 Lexus SC uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 50mm.
What other years of Lexus SC have the same bolt pattern as the 2000?
The Lexus SC uses the 5x114.3 pattern from 1992 through 2010. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Lexus SC?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 60.1mm (using hub rings if larger).
What does 50mm offset mean for the 2000 SC?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Lexus.
Can I use spacers on my 2000 Lexus SC?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Do 2000 Lexus SCs use lug bolts or lug nuts?
The 2000 SC requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset