2025 Nissan LEAF Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Nissan LEAF is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).
2025 Nissan LEAF Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 83 ft-lbs (113 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 LEAF — Year-Specific Fitment Context
The 2025 Nissan LEAF is in year 15 of 16 using the 5x114.3 pattern (2011–2026). Wheels from any 2011–2026 Nissan LEAF are cross-compatible with the 2025 model.
Nissan LEAF Bolt Pattern by Year
Looking for all generations? View the complete Nissan LEAF (2011–2026) Bolt Pattern & Generation Guide →
The table below shows how the LEAF's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
| ▸ 2025 | 5x114.3 | 66.1 | 40-45 |
| 2026 | 5x114.3 | 66.1 | 40-45 |
2025 Nissan LEAF Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Nissan LEAF, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1996 Nissan 200SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 1996 Nissan 240SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2020 Nissan 370Z | 66.1 mm (Exact) | 35-45 | 12x1.25 (Cone) |
| 2022 Nissan 400Z | 66.1 mm (Exact) | 20-35mm | M12x1.25 (Cone) |
| 1999 Nissan Altima | 66.1 mm (Exact) | 35-45 | 12x1.25 (Cone) |
| 2023 Nissan Ariya | 66.1 mm (Exact) | 35-45mm | M12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2008 MAZDA B-Series Regular Cab | 67.1 mm | 67.1mm → 66.1mm |
45-50 |
| 2021 MAZDA CX-3 | 67.1 mm | 67.1mm → 66.1mm |
45-50 |
| 2025 MAZDA CX-30 | 67.1 mm | 67.1mm → 66.1mm |
45-50 |
| 2025 MAZDA CX-5 | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
| 2025 MAZDA CX-50 | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
| 2025 MAZDA CX-70 | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Nissan LEAF — Frequently Asked Questions
What is the bolt pattern for a 2025 Nissan LEAF?
The 2025 Nissan LEAF uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-45mm.
What other years of Nissan LEAF have the same bolt pattern as the 2025?
The Nissan LEAF uses the 5x114.3 pattern from 2011 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What does 40-45mm offset mean for the 2025 LEAF?
An offset of 40-45mm means the wheel's mounting surface is 40-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
What is the factory wheel offset for a 2025 Nissan LEAF?
The OEM offset for the 2025 LEAF is typically around 40-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2025 Nissan?
The 2025 LEAF uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2025 Nissan LEAF?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 LEAF, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →