2008 Lexus SC Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Lexus SC, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 SC — Year-Specific Fitment Context
The 2008 Lexus SC is in year 17 of 19 using the 5x114.3 pattern (1992–2010). Wheels from any 1992–2010 Lexus SC are cross-compatible with the 2008 model.
Lexus SC Bolt Pattern by Year
The table below shows how the SC's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 60.1 | 50 |
| 1993 | 5x114.3 | 60.1 | 50 |
| 1994 | 5x114.3 | 60.1 | 50 |
| 1995 | 5x114.3 | 60.1 | 50 |
| 1996 | 5x114.3 | 60.1 | 50 |
| 1997 | 5x114.3 | 60.1 | 50 |
| 1998 | 5x114.3 | 60.1 | 50 |
| 1999 | 5x114.3 | 60.1 | 50 |
| 2000 | 5x114.3 | 60.1 | 50 |
| 2002 | 5x114.3 | 60.1 | 45 |
| 2003 | 5x114.3 | 60.1 | 45 |
| 2004 | 5x114.3 | 60.1 | 45 |
| 2005 | 5x114.3 | 60.1 | 45 |
| 2006 | 5x114.3 | 60.1 | 45 |
| 2007 | 5x114.3 | 60.1 | 45 |
| ▸ 2008 | 5x114.3 | 60.1 | 45 |
| 2009 | 5x114.3 | 60.1 | 45 |
| 2010 | 5x114.3 | 60.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Lexus SC
For your 2008 Lexus SC, the bolt pattern is 5x114.3 with a critical center bore of 60.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify spoke clearance with brake calipers. Lug nuts are M12x1.5 with a conical (60-degree) seat. Using incorrect seat type (e.g., ball seat) can lead to wheel loosening. Re-torque after 50-100 miles. Wheels from 1992-2010 Lexus SC models are direct fit.
Historical Fitment Data Reference
In our dataset, Lexus SC appears from 1992 to 2010 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (60.1mm ID to aftermarket bore) to avoid vibrations.
- ✅ Stick to offset 40-50mm; lower offsets may rub fenders, higher may contact suspension.
- ✅ Re-torque lug nuts to 76 lb-ft after 50-100 miles; use conical seat nuts only.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Lexus SC — Frequently Asked Questions
What is the bolt pattern for a 2008 Lexus SC?
The 2008 Lexus SC uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.
What other years of Lexus SC have the same bolt pattern as the 2008?
The Lexus SC uses the 5x114.3 pattern from 1992 through 2010. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Lexus SC?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Do 2008 Lexus SCs use lug bolts or lug nuts?
The 2008 SC requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2008 Lexus SC?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the center bore of a 2008 Lexus SC?
The factory center bore (hub bore) for the 2008 Lexus SC is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset