2008 Lincoln Mark LT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Lincoln Mark LT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | N 14x2.00 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2008 Mark LT — Year-Specific Fitment Context
The 2008 model year is the final year of the Lincoln Mark LT's 6x135 bolt pattern run (since 2006). Wheels from any 2006–2008 Lincoln Mark LT are cross-compatible with the 2008 model.
Lincoln Mark LT Bolt Pattern by Year
The table below shows how the Mark LT's wheel specifications have changed over the years. The 2008 model year is highlighted.
Fitment Notes
The 2008 Lincoln Mark LT has a bolt pattern of 6x135.
This means it is a 6 lug pattern with a circle diameter of 135mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Lincoln Mark LT appears from 2006 to 2008 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
2008 Lincoln Mark LT — Frequently Asked Questions
What is the bolt pattern for a 2008 Lincoln Mark LT?
The 2008 Lincoln Mark LT uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 45mm.
What other years of Lincoln Mark LT have the same bolt pattern as the 2008?
The Lincoln Mark LT uses the 6x135 pattern from 2006 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Why is matching the 87.1mm center bore important for the 2008 Mark LT?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2008 Lincoln Mark LT use?
The 2008 Lincoln Mark LT uses N 14x2.00 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2008 Lincoln?
The 2008 Mark LT uses a 6x135 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2008 Lincoln Mark LT?
The OEM offset for the 2008 Mark LT is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Lincoln Mark LT is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2006-2008 (3 model years).
- Observed bolt-pattern variants: 1 (6x135).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2008 Lincoln Mark LT, please report it via our About page contact so we can verify and update this record.