2008 Lotus Exige S Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Lotus Exige S, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 20-35mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Exige S — Year-Specific Fitment Context
The 2008 model year is the final year of the Lotus Exige S's 4x100 bolt pattern run (since 2007). Wheels from any 2007–2008 Lotus Exige S are cross-compatible with the 2008 model.
Lotus Exige S Bolt Pattern by Year
The table below shows how the Exige S's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 4x100 | 56.6 | 20-35mm |
| ▸ 2008 | 4x100 | 56.6 | 20-35mm |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2008 Lotus Exige S
For your 2008 Lotus Exige S, the 4x100 bolt pattern and 56.6mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 20-35mm; deviations risk rubbing or poor handling. Always use M12x1.5 lug nuts with the correct seat type—conical (60-degree) or ball seat—matching the wheel's design. Incorrect seating can cause loosening or wheel damage. Verify wheel weight and load rating; lightweight wheels improve performance but must handle the car's demands. Safety first: improper fitment compromises braking and stability.
Historical Fitment Data Reference
In our dataset, Lotus Exige S appears from 2007 to 2008 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 55.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Check wheel clearance with the brake calipers; some aftermarket wheels may require spacers.
- ✅ Avoid universal fit wheels; they often lack proper hub-centric fitment and correct offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Lotus Exige S — Frequently Asked Questions
What is the bolt pattern for a 2008 Lotus Exige S?
The 2008 Lotus Exige S uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 20-35mmmm.
What other years of Lotus Exige S have the same bolt pattern as the 2008?
The Lotus Exige S uses the 4x100 pattern from 2007 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Lotus Exige S?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.6mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
What does 20-35mmmm offset mean for the 2008 Exige S?
An offset of 20-35mmmm means the wheel's mounting surface is 20-35mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Lotus.
What is the PCD for a 2008 Lotus Exige S?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Exige S, the PCD is 4x100.
What is the center bore of a 2008 Lotus Exige S?
The factory center bore (hub bore) for the 2008 Lotus Exige S is 56.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset