2011 Lotus Exige Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Lotus Exige, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 31 front, 38 rear |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Exige — Year-Specific Fitment Context
The 2011 model year is the final year of the Lotus Exige's 4x100 bolt pattern run (since 2006). Wheels from any 2006–2011 Lotus Exige are cross-compatible with the 2011 model.
Lotus Exige Bolt Pattern by Year
The table below shows how the Exige's wheel specifications have changed over the years. The 2011 model year is highlighted.
Fitment Notes
The 2011 Lotus Exige has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Lotus Exige appears from 2006 to 2011 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 7.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2011 Lotus Exige — Frequently Asked Questions
What is the bolt pattern for a 2011 Lotus Exige?
The 2011 Lotus Exige uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 31 front, 38 rearmm.
What other years of Lotus Exige have the same bolt pattern as the 2011?
The Lotus Exige uses the 4x100 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What does 31 front, 38 rearmm offset mean for the 2011 Exige?
An offset of 31 front, 38 rearmm means the wheel's mounting surface is 31 front, 38 rearmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Lotus.
What is the center bore of a 2011 Lotus Exige?
The factory center bore (hub bore) for the 2011 Lotus Exige is 56.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2011 Lotus Exige?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 31 front, 38 rearmm, and a center bore of at least 56.6mm (using hub rings if larger).
What is the factory wheel offset for a 2011 Lotus Exige?
The OEM offset for the 2011 Exige is typically around 31 front, 38 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Lotus Exige is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2006-2011 (4 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 7.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 Lotus Exige, please report it via our About page contact so we can verify and update this record.