1994 MAZDA 323 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 MAZDA 323, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 323 — Year-Specific Fitment Context
The 1994 model year is the final year of the MAZDA 323's 4x100 bolt pattern run (since 1992). Wheels from any 1992–1994 MAZDA 323 are cross-compatible with the 1994 model.
MAZDA 323 Bolt Pattern by Year
The table below shows how the 323's wheel specifications have changed over the years. The 1994 model year is highlighted.
Fitment Notes
The 1994 MAZDA 323 has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, MAZDA 323 appears from 1992 to 1994 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1994 MAZDA 323 — Frequently Asked Questions
What is the bolt pattern for a 1994 MAZDA 323?
The 1994 MAZDA 323 uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 45mm.
What other years of MAZDA 323 have the same bolt pattern as the 1994?
The MAZDA 323 uses the 4x100 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1994 MAZDA 323?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 45mm, and a center bore of at least 54.1mm (using hub rings if larger).
What is the PCD for a 1994 MAZDA 323?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 323, the PCD is 4x100.
What is the factory wheel offset for a 1994 MAZDA 323?
The OEM offset for the 1994 323 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 54.1mm center bore important for the 1994 323?
The 54.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
MAZDA 323 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1994 (3 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1994 MAZDA 323, please report it via our About page contact so we can verify and update this record.